Clean heat source station principle
The clean heating station accurately controls the energy consumption of the system operation through multiple heating modes and multiple system combinations. This series of products can be used as heating heat source for all kinds of new and renovated projects. The end forms can use metal radiators, fan coils, and floor heating; the system is flexible and simple, low operating costs, low management costs and no pollutant emissions.
The heat-recovery heating station can more stably extract low-grade energy in the air under low-temperature conditions, and perform first-level heating, and the excess can be stored by an energy storage tank; and the energy produced by the low-temperature heat pump through the high-temperature heat pump The secondary heating is performed to reach the temperature of the heating medium required for heating. The new heating mode using quasi-two-stage cascade pump heat makes low-temperature stage heat pumps have low compression ratio, high energy efficiency, low operating costs, and long service life under low-temperature conditions in winter.
It is used for heating large-scale building areas such as hotels, schools, hospitals, shopping malls, highway toll stations, service areas, and factories. A single system can meet the heating needs of buildings between 2000 and 100,000 square meters.
Electric drive, clean and pollution-free
Use a small amount of electrical energy to drive the compressor to work, and continuously draw heat from the surrounding air. Compensated by consuming part of high-grade energy (electric energy), so that thermal energy is transferred from low-temperature heat source to high-temperature heat source. No pollutants are emitted during the heating process.
Natural working fluid, environmentally friendly
The fourth generation of natural environmental protection working fluid CO 2
(working fluid code R744) is used. Excellent environmental protection performance, ozone destruction potential ODP = 0, greenhouse effect potential GWP = 1, does not destroy the ozone layer, almost no greenhouse effect; stable chemical properties, safe non-toxic, non-flammable, no odor.
Energy efficient, low operating costs
The energy efficiency of the equipment is far beyond the national energy efficiency standard, and only 1 part of electricity can produce 4 parts of electricity. Operating costs are only 40% of electric boilers in the same situation.
Phase change heat storage, peak clipping and valley filling
The use of high-tech inorganic phase change thermal storage materials can make full use of local preferential peak-valley electricity price policies to work in the valleys with lower electricity prices and store heat in the peaks with higher electricity prices to use stored heat for heating, further reducing operating costs. .
No fear of severe cold, wide application range
Designed specifically for the cold climate characteristics of the Three North Regions, -40 ° C still works efficiently, setting industry records, with excellent low-temperature heating capabilities, without the need for additional electrical assistance. It has been successfully applied in North Xinjiang and Northeast China. The long winter can also make the room warm as spring.
Reliable heating due to hot water
The maximum water temperature can reach 80 ° C, which can seamlessly match with various forms of ends such as fan coils, floor heating, and radiators. It can replace the traditional coal-fired boiler as a heating heat source, and the heating pipe network and ends do not need to be replaced. The original "large temperature difference, small flow" system.
Energy consumption monitoring, real-time monitoring of the Internet of Things
The advanced remote operation and maintenance platform of the Internet of Things can grasp the real-time running status of the system and remote maintenance. The unique AI learning function can automatically adjust the operating parameters according to the user's usage habits and weather forecast, so that the system is in the optimal operating state.
Hot and cold dual system, one machine dual purpose
Combined cooling and heating, high equipment application rate, saving initial investment. The working mode can be switched freely in winter and summer, and it has both heating and cooling functions.